PA6G (Polyamide 6G) cast nylon is an advanced engineering plastic produced through an anionic polymerization process, delivering superior mechanical and chemical properties compared to conventional extruded nylon.
PA6G cast nylon pipes are engineered for demanding fluid handling and structural applications. Their seamless, dense microstructure ensures exceptional wear resistance and dimensional stability across wide temperature ranges.
PA6G cast nylon tubes offer precise inner and outer diameter tolerances, making them ideal for guide sleeves, linear bushings, and precision mechanical components. Available in standard and custom dimensions up to large-diameter formats.
Nylon bushings machined from PA6G cast nylon stock deliver low-friction, self-lubricating bearing surfaces for rotating, oscillating, and linear motion applications, extending machine service life with minimal maintenance.
PA6G cast nylon consistently outperforms alternative engineering materials in critical performance categories

Our PA6G Cast Nylon Pipe is manufactured via controlled anionic casting, producing a finished tube with a homogeneous, void-free cross-section. The material exhibits a light ivory to natural white color and excellent surface finish suitable for precision machining.
The cast pipe is available in standard lengths of 500mm, 1000mm, and 2000mm, with outer diameters ranging from 30mm to 1000mm and inner diameters customized to your specification. Wall thickness can be adjusted from 10mm to 200mm depending on application requirements.
Compared to extruded nylon PA6, the cast PA6G variant offers up to 30% higher mechanical strength, improved impact resistance, and superior creep resistance under sustained loading conditions — making it the preferred choice for structural and load-bearing engineering applications.
Standard physical and mechanical properties of PA6G cast nylon pipe and tube (values at 23°C, 50% RH unless noted)
| 🧪 Property | Test Standard | PA6G Natural | PA6G + MoS₂ | Unit |
|---|---|---|---|---|
| Density | ISO 1183 | 1.15–1.17 | 1.15–1.18 | g/cm³ |
| Tensile Strength | ISO 527 | 75–85 | 70–80 | MPa |
| Elongation at Break | ISO 527 | 20–40 | 15–30 | % |
| Flexural Modulus | ISO 178 | 3200–3600 | 3100–3500 | MPa |
| Hardness (Shore D) | ISO 868 | 80–84 | 78–83 | — |
| Impact Strength (Charpy) | ISO 179 | ≥ 6 | ≥ 5 | kJ/m² |
| Max Continuous Service Temp | — | 85–100 | 85–100 | °C |
| Melting Point | DSC | 220–225 | 218–224 | °C |
| Water Absorption (24h) | ISO 62 | 1.3–1.8 | 1.2–1.7 | % |
| Friction Coefficient (dry) | — | 0.20–0.30 | 0.10–0.18 | — |
| Available OD Range | — | 30–1000 | 30–600 | mm |
| Standard Length | — | 500 / 1000 / 2000 | 500 / 1000 | mm |
The PA6G cast nylon tube is manufactured with exceptional concentricity between inner and outer diameters, ensuring consistent wall thickness throughout the entire length of the tube. This geometric precision is critical for applications such as hydraulic guide sleeves, liner tubes, and structural conduits.
Standard bore tolerances are maintained within ±0.5mm on the outer diameter, with tighter tolerances achievable through CNC post-machining. Inner bore dimensions are customized from as small as 10mm up to 900mm depending on wall thickness requirements.
The tube's smooth, non-porous inner surface reduces turbulence in fluid-carrying applications and minimizes particulate buildup in pneumatic conveying systems. Its lightweight nature — approximately one-seventh the density of steel — significantly reduces structural loading compared to metal tube alternatives.
Nylon bushings produced from PA6G cast nylon bar or tube stock are widely used as plain bearing elements in machinery, conveyors, agricultural equipment, and material handling systems. Their self-lubricating property — derived from the polymer's inherent low friction — eliminates the need for regular grease application in many operating conditions.
PA6G nylon bushings are available in both plain (dry running) and oil-filled (MoS₂-modified) grades. The MoS₂ variant incorporates molybdenum disulfide particles uniformly distributed throughout the material matrix, reducing the friction coefficient by up to 40% compared to natural grade.
Custom-machined nylon bushings can be produced to any dimension including flanged, split, and stepped designs. Our CNC machining center handles tolerance requirements down to ±0.01mm for precision bearing applications.
PA6G cast nylon pipe, tube and bushings serve a wide range of demanding industrial environments
Guide sleeves, wear pads, bearing liners, and structural tubes for hydraulic presses and CNC machine tools
Insulating conduits, cable guide tubes, and wear-resistant bushings in turbine and generator assemblies
Abrasion-resistant lining pipes, conveyor roller bushings, and structural guide tubes in harsh mining environments
Self-lubricating pivot bushings, fertilizer conveying tubes, and wear liners for seeding and harvesting equipment
Corrosion-resistant shaft bushings, cable ducting, and underwater structural liner tubes in seawater environments
Suspension bushings, drive shaft guide tubes, and precision bearing components for automotive production lines
FDA-compliant grades available for product contact conveying tubes, rollers and food-grade bearing bushings
Chemically inert guide tubes, non-magnetic components, and precision machined structural elements
Why PA6G cast nylon outperforms common alternatives for pipe and bushing applications
From raw caprolactam monomer to precision-finished PA6G cast nylon components
High-purity caprolactam monomer and catalyst system precisely measured and conditioned
Anionic polymerization in precision-heated rotational molds ensures uniform, void-free structure
OD, ID, wall thickness and concentricity verified on every casting before release
Optional precision turning and boring to customer-specified tolerances ±0.01mm
Full dimensional report, material certification, and protective packaging for safe global shipping
We control the entire value chain from raw monomer through final CNC-machined component, ensuring consistent quality and competitive pricing without intermediary markups.
Our proprietary casting technology enables production of PA6G pipes and tubes up to 1000mm outer diameter — dimensions impossible with standard extrusion processes.
Natural PA6G, MoS₂-filled, oil-filled, glass-fiber reinforced, and anti-static grades available to match specific tribological and mechanical requirements.
Standard dimensions held in stock for immediate dispatch. Custom sizes and machined components produced within 7–15 working days depending on complexity.
Regularly supplying PA6G cast nylon pipe and tube to customers in Europe, North America, Southeast Asia, and the Middle East with full export documentation.
Our engineering team provides material selection guidance, dimensional recommendations, and application-specific advice to ensure optimal product performance.
Tell us your required dimensions, grade, and quantity — we'll respond with pricing and lead time within 24 hours.
📨 Get Instant Quote 📋 Download Datasheet